Are you a blogger who always struggles with writer’s block?

Or do you want to create blog posts on your own? But don’t know how to write articles like a pro with zero experience? 

If so, then you don’t need to worry about it anymore because Jasper.ai is the solution!

With Jasper.ai, it is now possible for you to make amazing blog posts yourself without hiring any expensive content writer or writer’s block issue.

Jasper is an AI writing tool that use GPT-3 to write articles like a real human. If you haven’t purchased Jasper then activate the Jasper FREE Trial from here.

Read this article till the end to understand how to write blog post with Jasper.ai Pro Unlimited and Boss Mode plan.

So, without any further delay, let’s get started!

Affiliate Disclosure (Please read it):

The links of Jasper AI available in this article are my affiliate link. If you’ll use any of these links to purchase Jasper.ai then I’ll get a small commission without costing you anything extra. It’ll only help me to run this blog successfully and provide helpful content like this for Free. Thanks in advance if you are going to use my affiliate link for purchasing the Jasper AI. ❤️❤️❤️


Which Plan do you need to Purchase to write Articles With Jasper AI?

how to write blog post with jasper ai

If you want to write your articles using Jasper.ai then you need to purchase Boss Mode Plan.

Why? Because to write blog posts (i.e. long-form content) you need the “Long-Form Assistant” tool which is available in this plan. 

Boss Mode Plan gives direct access to Jasper via commands like “Hey Jasper, Write an introduction about how to lose weight”. 

In this way in boss mode, you can order Jasper in normal language to write about anything you want.

That’s why I’ll highly recommend you to purchase Boss Mode Plan because by just paying $10 extra, you are going to get lots of amazing features.


How to Write Blog Post With Jasper AI Long-Form Assistant Tool (Blog Post Workflow)?

For using the Long-form Assistant tool, you need to purchase Jasper Boss Mode plan. 

Follow these simple steps to write your first blog post with Jasper Boss Mode plan..

STEP 1: Purchase Boss Mode Plan

As I already told you that if you want to write blog posts using Jasper then you need to purchase either the Jasper Boss Mode plan.

So, if you have not purchased Jasper yet then click on this special link to get your Jasper Boss Mode account

Or If you are using the Jasper Starter plan then you need to upgrade your plan to the Boss Mode plan.

STEP 2: Open Long-form Assistant tool

Now, log in to your Jasper Dashboard and go to “Templates” >> “Long-Form Assistant”

open long form assistant tool to write blog post with jarvis ai

It’ll show you two options, “Start from Scratch” and “Blog Post Workflow”. Click on the second option i.e. “Blog Post Workflow”

click on blog post workflow to write article with jarvis ai pro unlimited plan

STEP 3: Describe the content you want to create

Now, it’s time to describe the content you want to create with Jasper. It’ll help Jasper to understand what you want to cover in your blog post.

describe the content you want to create in jarvis.ai long form assistant

For Example: If I want to write an article about weight loss then I can describe my content like this:

“Write an article about 10 tips to lose weight. Please cover all tips in detail and explain why should we focus on losing weight”

Similarly, you can describe the content you want to write with Jasper.

STEP 4: Write or Generate Blog Post Title

After describing the content, you need to enter your blog post title.

jarvis.ai long form assistant add a title

If you are facing a problem coming up with an attention-grabbing blog post title then you can click on the “Generate Idea” button. It’ll generate some amazing blog post titles for you. You can choose any of these titles. 

jarvis.ai long form assistant generated titles

STEP 5: Write or Generate Blog Post Introduction Paragraph

Now, it’s time to write the introduction paragraph of your article.

jarvis.ai long form assistant inro paragraph

If you are facing difficulty writing an amazing introduction paragraph that will encourage your readers to read the entire blog post then you can click on the “Generate Ideas” button. 

jarvis.ai long form assistant generated intro paragraphs

It’ll generate lots of introduction paragraphs for you. You can select the most suitable one from this list.

STEP 6: Click on the “Open Editor” button

Now, you need to click on the “Open Editor” button. It’ll create a document for you based on your inputs where you can start writing your article with the help of Jasper.

open editor of jarvis.ai long form assistant

STEP 7: Write Subheadings and Click Compose Button

If you want to rank on Google then I’ll highly recommend you to prepare your article layout yourself by analyzing top 10 ranking articles. 

After preparing your article layout, paste it into this document and write starting line for the first subheading and then click on the “Compose” button. 

write first line and click compose button in jarvis.ai long form assistant

As you can see below screenshot that Jasper will write awesome content based on your input.

jarvis.ai long form assistant generated article

Similarly, write starting line of the next subheading and click on the “Compose” button and Jasper will generate content for you.

In this way, you can write an article from scratch by using Jasper Pro Unlimited plan. 


How to Write Articles using Jasper Boss Mode (Start From Scratch option)?

Boss Mode give you direct access to Jasper. It means that you can talk to Jasper as if he were a human assistant. 

Example: Hey Jasper, Write an introduction paragraph about… 

Also, Jasper can read 2000-3000 characters above your cursor. So, you can expect better output than the Pro Unlimited plan. And Compose button is unlocked in Boss Mode it means you can click the “Compose” button again and again in Boss Mode without writing anything.

Now, let’s see how to write article using Jasper.ai Boss Mode.

STEP 1: Purchase Boss Mode Plan

First of all, you need to purchase the Jasper Boss Mode plan.

If you haven’t purchased Jasper yet then don’t worry, you can get your Jasper Boss Mode free trial account from here.

This free trial will help you to decide that Jasper Boss Mode is the right plan for you or not.

STEP 2: Open Long Form Assistant Tool

Now, log in to your Jasper Dashboard and go to “Templates” >> “Long-Form Assistant”.

open long form assistant tool to write blog post with jarvis ai

It’ll show you the option “Start From Scratch”, click on that option.

click on start from scratch to write blog post using jarvis boss mode

STEP 3: Enter Title, Article Brief, Tone of Voice and Keywords

Now, It’s time to describe the content you want to write. It’ll help Jasper to understand what you want to cover in your article.

write blog post title description and keyword to write article with jarvis ai boss mode

You need to describe the following things:

  • Title: Write a title of your blog post in this field.
  • Article Brief: Explain what you want to cover in your blog post.
  • Tone of Voice (Optional): You can also enter the tone of voice you want to use in your blog post. 
  • Keywords (Optional): If you want to rank for any particular keyword then you can describe that keyword in this field.

STEP 4: Use Jasper Commands to See Magic.

As I already told you that if you want to rank your article then prepare the article layout yourself by checking the top 10 ranking articles. 

After that, paste your article layout in this document and then use either the “compose” button or Jasper Boss Mode Commands to create content. 

For Example:

I’ve written “Write an introduction paragraph about losing weight without going to Gym”

enter jarvis ai boss mode command to write blog post and other long form content

and you can see in the below screenshot that Jasper has written an amazing introduction paragraph for me.

blog post introduction paragraph written by jarvis ai boss mode command

Here are some amazing Boss Mode commands you can use to write your article:

  • Jasper, Write an introduction paragraph about…
  • Jasper, give me some headline ideas for …
  • Jasper, generate an outline for…
  • Jasper, honestly summarize the above
  • Jasper, explain why should we lose weight?
  • Jasper, run content improver on the above paragraph
  • Jasper, rewrite the above paragraph towards teachers

similarly, you can order anything to Jasper like this in normal language.

NOTE: to run these commands, place your cursor at the end of the command and press “CTRL”+”Enter” from your keyword (if you are using Windows PC) or press “CMD”+”Enter” (if you are using Mak)


How to Write Blog Post using Jasper AI Recipes

The major problem you may face during writing your blog post with Boss mode is to decide which Jasper commands you should use for writing your article. 

Right?

Now, you don’t need to worry about it. 

Why? because If you are using Jasper Boss mode then you’ll also get access to Jasper Recipes. 

Jasper Recipes are pre-built workflows. It contains a series of Jasper Boss Mode commands that you can use to create content. You can even make your own recipes or use the recipes shared by other people in the community.

Follow these steps to understand how to write blog post with Jasper Recipes:

STEP 1: Purchase Jasper Boss Mode Plan

Jasper Recipes are only available in Boss Mode Plan. 

So, if you want to use these recipes to write 5x faster then you have to purchase the Jasper.ai Boss Mode plan.

You can click here to activate the Boss Mode plan. If you still doubt that the Boss Mode plan is right for you or not then you can activate the Boss Mode FREE trial from here.

STEP 2: Open Jasper Recipes

After purchasing the Boss Mode plan, log in to your Jasper account and click on the “Recipes” from the left sidebar.

step 1 select jarvis recipes from left sidebar

It’ll show you lots of recipes as you can see in the below screenshot.

step 2 featured jarvis ai recipes list

STEP 3: Select Blog Post Recipe

When you’ll hover over the “Blog Post Recipe” then you’ll see a button “Open Recipe”. Just click on this button. 

step 3 hover over jarvis recipes you want to use and click on open button

It’ll show you series of Jasper commands that is available in this recipe and you’ll also get an explainer video that will help you to understand how to use this recipe.

step 4 it will show you jarvis ai recipes workflow commands

When You’ll open this blog post recipes then it’ll show you following commands:

>write a brief for {TOPIC}

>write blog title ideas

>write an introduction

>write a blog outline

>write about {OUTLINE_ITEM_1}

>write about {OUTLINE_ITEM_2}

>write about {OUTLINE_ITEM_3}

>write a blog conclusion on {OUTLINE_ITEM_1}, {OUTLINE_ITEM_2}, {OUTLINE_ITEM_3}

STEP 4: Run Blog Post Recipe

Now, click on the “Run” button which is showing in the top right corner to run this Blog Post Recipe. 

step 5 click on run button to run jarvis recipes

When you’ll click on the run button then Jasper will create a blank document for you and paste all these series of commands.

step 6 jarvis recipes commands will be paste in document so replace variables and run each commands

STEP 5: Replace Variables with Your Article Topics

As you can see in the above screenshot that there are some variables like {TOPIC}, {OUTLINE_ITEM_1}, {OUTLINE_ITEM_2}, {OUTLINE_ITEM_3}.

Just replace these variables with your blog post title and subheadings.

For example, my blog post topic is “How to Increase website traffic?” and my outline i.e. subheadings are “Create a Facebook Group”, “Build Your Email List”, “Do Proper On-Page SEO” then I’ll replace these variables like this

  • {Topic} = How to Increase Website Traffic?
  • {OUTLINE_ITEM_1} = Create a Facebook Group 
  • {OUTLINE_ITEM_2} = Build Your Email List
  • {OUTLINE_ITEM_3} = Do Proper On-Page SEO

Similarly, replace these variables according to your blog post topic.

STEP 6: Run Jasper Recipes Commands

Now, run these commands one by one. It’s very easy. Just place your cursor at the end of the command and press “CTRL”+”Enter” (in Windows PC) or “CMD”+”Enter” (in Mac)

NOTE: you can also click the “Compose” button and use Jasper commands to write more content according to your needs.


FAQs related to Jasper.ai Blog Post Writing Feature 

Can we write blog posts using Jasper AI?

Yes. You can use Jasper.ai to write blog posts using its “long-form assistant” tool. It writes unique articles using GTP-3 technology and the quality of the generated articles are far better than other AI blog post writing tools.


Which plan is suitable for writing articles?

If you want to write blog posts using Jasper then you have to purchase either the Pro Unlimited plan or Boss Mode Plan. because to write articles, you need the “Long-form Assistant” tool which is available only in Pro Unlimited and Boss Mode plan.

Can we write articles with Jasper Starter Plan?

No, you can’t write articles using Jasper Starter Plan because the “Long-form Assistant” tool is not available in this plan. You can know more about Jasper Pricing from here.

Can Jasper write SEO optimized articles?

Yes, Jasper writes SEO optimized articles. It comes with Surfer SEO integration which helps you to optimize your article for Google and other search engines.

Does Jasper generate plagiarism free articles?

Yes, Jasper AI generates 100% original and plagiarism free articles. So, you don’t need to worry about it.

Does Jasper comes with a Lifetime deal?

No, Jasper AI doesn’t come with a lifetime deal. It comes with 5-days free trial and after that, you’ll need to purchase any plan to continue using it.

Is there a good alternative to Jasper for Writing blog posts?

Yes, you can use Shortly AI which offers the same feature as the Jasper Boss Mode plan at half price. I’m personally using both Jasper and ShortlyAI and I’m a fan of both tools.  If you want then you can try ShortlyAI for free without a credit card from here.

Does Jasper offer any Discount?

No, Jasper.ai don’t offer any discount on its plans but if you want to save some money then you can check Jasper Black Friday sale.

What is Jasper Mastermind Training?

Jasper team and Edam Enfroy launched a blogging course called Jasper Mastermind (Review) . In this course, you’ll get complete training from Adam Enfroy. He is a professional blogger who is making $100k+ every month.


Final Words about Jasper for Writing Blog Posts

I hope that after reading this article you understood how to write a blog post using Jasper.ai.

Jasper is my favorite AI writing tool because it always gives me what I want. It saves my time and allows me to produce more blog posts.

Previously,  it takes me approx. 4-5 days to complete 4,000+ words of articles. Now, I can complete the same article with Jasper in 3-4 hours. 

This is the reason why I love Jasper and think that it’s far better than other AI writing tools.

So, what you’re thinking about?

Just active Free Trial of Jasper and start writing blog posts without spending too much effort.

If you still have any doubt then please feel free to ask your questions via the comment box below. I’ll try my best to solve your problem.

how to write blog post with jasper ai

Similar Posts

2 Comments

  1. Hey Sumit,

    You’ve given a great way to save time and energy for bloggers. Before, we were used to writing articles on our own, and now as time passes people are accepting AI writing tools.

  2. Hi Sumit,

    AI writing assistants are increasing day by day and they are very helpful for us to save time on writing. Thanks for recommending Jarvis I’ll give it a try.

Leave a Reply

Your email address will not be published. Required fields are marked *